Service and repair of projectors in Wrocław

Yes. We also service projectors from ASUS, JMGO, Wanbo, Dangbei, Anker Nebula, Overmax, Kiano, Kodak, Barco, Christie, EIKI, Ricoh, Hitachi, Sanyo, Mitsubishi, Casio, InFocus, Toshiba, Dell, HP, Lenovo, 3M, ASK Proxima, Boxlight, PLUS, Digital Projection, SIM2, Projectiondesign, Runco and Marantz. Whether a specific repair is possible depends on the type of fault and the availability of parts.

Yes, we also accept older and discontinued models. We check whether the existing components can be repaired or suitable parts can be sourced. If the repair turns out not to be worth it, we tell you before starting any work.

Yes. We service projectors that use lamps, LEDs and laser light sources, as well as DLP, LCD and 3LCD imaging technologies. The scope of the repair depends on the design of the specific model.

The cause may be a damaged power supply, lamp ignition circuit, fan, temperature sensor or control electronics. The projector may also switch off because it is overheating. We establish the exact cause during the diagnosis. We also accept projectors for diagnosis after liquid damage, a fall or a power surge.

The problem may be caused by damage to the light source, optical system, electronics or signal input. Sometimes the cause is the wrong HDMI input being selected or a damaged cable. If a basic check of the connections does not help, a diagnosis is needed.

In DLP projectors, fixed white or black dots may indicate damaged micromirrors on the DMD chip. The damaged chip usually has to be replaced, once the fault has been confirmed.

Discolouration may result from worn polarisers, damaged LCD panels or problems with the optical system. We identify the cause based on the type of discolouration and the design of the projector. In LCD projectors, discolouration may also be caused by dirty polarisers — if the material and design of the part allow it, they can be cleaned ultrasonically; otherwise, the polariser may need replacing.

The most common possible causes are dirty filters, built-up dust, restricted airflow or a faulty fan. In such cases, the cooling system may need maintenance or a damaged component may need repairing.

The LAMP light usually indicates a problem with the lamp or its power supply (ballast), and TEMP indicates overheating: a dirty cooling system, a faulty fan or a faulty temperature sensor. The exact meaning of the signals depends on the projector model, so we confirm the cause during the diagnosis.

No. A dim image may be caused by a worn lamp, but also by dirty optics, damaged polarisers or other problems. Before replacing the lamp, it is worth checking the real cause of the loss of brightness. When replacing it, we fit original lamps, compatible replacements or a lamp supplied by the customer. A lamp replacement usually takes 1–3 days.

Yes. We diagnose and repair damaged HDMI ports and the circuits responsible for receiving the signal. If the projector does not detect the computer or the image drops out, we also check other possible causes.

The service includes cleaning the inside, the cooling system, fans, filters and accessible optical components. In DLP projectors whose design requires it, we also replace the thermal paste of the DMD chip. We also check how the electronics work, the operating temperature and the quality of the displayed image. We adapt the scope of work to the design of the device.

It depends on the operating conditions. At home or in the office, cleaning once a year is usually enough. In a dusty room, with many hours of daily use or with pets around, it is worth doing it more often. Signs that cleaning is needed are louder fans, temperature messages and a drop in image brightness.

The initial online consultation and the initial diagnosis when you bring in the device are free. The full diagnosis is also free if we carry out the repair. If you decide not to go ahead with the repair, the cost is 60 / 100 / 180 zł, depending on the projector category.

The cost depends on the type of fault and the device category. The prices of individual jobs are in our price list, divided into compact, home and office, and professional and installation projectors. The prices in the price list cover the service itself — if the repair needs parts, their cost is added separately. We determine the cost of parts after diagnosing the specific model, and before the repair we give you the scope of work and the full cost.

Yes. After the diagnosis, we give you the scope of work and the full repair cost, including the cost of any parts needed. We start the repair only after the customer has accepted the costs. If you decide to go ahead with the repair, the diagnosis is free. If you decide not to, you pay only for the diagnosis: 60 / 100 / 180 zł, depending on the projector category.

Diagnosis and a quote usually take 1–3 days. The repair time depends on the type of fault, the design of the device and the availability of parts. The expected times for individual jobs are given in the price list.

Yes. We give a 3-month warranty on projector repairs. If a fault covered by the warranty comes back during this time, we fix it free of charge.

Yes, we accept projectors by courier from anywhere in Poland. The customer pays for shipping to our service centre and back after the repair, according to the carrier’s rates. Before sending, switch the projector off and wait for it to cool down, protect the lens, pack the device in a sturdy box (ideally the original one) and fill the empty space so that the projector cannot move inside. You can also bring the projector to our service centre in person. If the projector is ceiling-mounted, we agree the visit and removal individually.

It depends on the value of the device, the repair cost and the availability of parts. A lamp replacement, power supply repair or maintenance can extend the life of an older projector. With costly damage to the optical system, it is worth comparing the quote with the price of a device with similar specifications.